Tag: forklift truck

Royal Mail Fined after Worker’s Foot is Ran Over

Royal Mail has been prosecuted and fined £50,000 following an incident in which an employee’s foot was ran over by a reach truck.

Inicident

On 7 March 2014 at the Royal Mail Group Limited (RMG) bundling centre in Rochester, an employee operating a reach truck accidently ran over another worker as he stepped out into an aisle.

Medway Magistrates’ Court heard that the injured worker was not wearing safety boots with steel toe caps as required. As a result, he suffered broken bones and bruising to his foot.

Investigation

The Health and Safety Executive (HSE) investigated the incident and found that transport within the workplace had not been managed in a way that ensured the safety of both vehicle operators and pedestrian workers. Furthermore, HSE found that if RMG had an improved system in place, the incident could have been avoided.

After pleading guilty to breaching Regulations 17(1) of the Workplace (Health, Safety and Welfare) Regulations 1992, and Regulation 3(1) of the Management of Health and Safety at Work Regulations 1999, Royal Mail Group Limited, of Victoria Embankment, London was fined a total of £50,000. The company were also ordered to pay costs of £10,406.

Injury at Work – Expert Advice

If you have been injured in the workplace you could be entitled to personal injury compensation. Remember, we offer you a FREE no-obligation consultation – discover today whether you have a claim. Speak to one of our professional and friendly advisers today on 0800 888 6 888 or email claims@hampsonhughes.co.uk

Source: Health & Safety Executive

Balfour Beatty Fined £2.6 Million after Death of Worker

A leading international infrastructure firm has been handed a £2.6 million fine after an employee was killed when a trench collapsed on him.

Sub-contractor James Sim was working on behalf of Balfour Beatty Utility Solutions Limited when the incident occurred on 14 April 2010 in Lancashire. The 32 year old from Barry, South Wales, was laying the ducting for a cable in a 2.4 meter deep trench, without any shoring. The trench collapsed, trapping Mr Sim and he was killed.

Balfour Beatty Utility Solutions Limited recently pleaded guilty at Preston Crown Court following an investigation by the Health and Safety Executive (HSE).

After the hearing, Chris Hatton, an inspector for HSE said:

“The level of this fine should serve as a warning to industry not to ignore health and safety matters.

“Balfour Beatty failed to adequately assess, plan and supervise the work being undertaken. Trench collapses are easy to prevent, and it is disappointing that James’ life was lost in such a tragic way.

“The family has shown great patience and support throughout this investigation which is a credit to both them and James’ memory.”

After pleading guilty to breaching Section 3(1) of the Health and Safety at Work etc. Act 1974, Regulation 31(1) of the Construction (Design and Management) Regulations 2007 and Regulation 3(1)(a) of the Management of Health and Safety at Work Regulations 1999, Balfour Beatty Utility Solutions Limited, of Park Square Newton, Chambers Road, Chapeltown, Sheffield was fined £2.6 million. The company was also ordered to wear £54,000.

Injury At Work – Expert Advice

If you have been injured in the workplace you could be entitled to personal injury compensation. Remember, we offer you a FREE no-obligation consultation – discover today whether you have a claim. Speak to one of our professional and friendly advisers today on 0800 888 6 888 or email claims@hampsonhughes.co.uk

Source: Health & Safety Executive

Firm Fined after Two Workers are Seriously Injured

A company responsible for the manufacture of vehicle bodies has been fined following an incident in which two workers were seriously injured.

Incident

On 12 January 2015, a third worker was attempting to move a vehicle weighing 18 tonnes when the other two employees became trapped between the moving vehicle and two stationary vehicles. One worker suffered severe crush injuries to his legs while the other worker suffered internal bladder and kidney injuries, as well as fractures to his ribs and pelvis. Another employee involved in the incident managed to move out of the way & did not sustain any injuries.

Investigation & fines

Following an investigation by the Health and Safety Executive, it was found that the company had not identified or assessed transport risks within the workplace. Furthermore, it was found that the company had failed to put safe systems of work and protective measures in place, as well as failing to ensure employee pedestrian safety whilst vehicles were in motion.

After pleading guilty to breaching Section 2 of the Health and Safety at Work etc Act 1974, Commercial Body Specialists Limited, of High Street, Tunstall, Stoke on Trent was fined £20,000 and ordered to pay costs of £4,461.

Injury at work – expert advice

If you have been injured in the workplace you could be entitled to personal injury compensation. Remember, we offer you a FREE no-obligation consultation – discover today whether you have a claim. Speak to one of our professional and friendly advisers today on 0800 888 6 888 or email claims@hampsonhughes.co.uk

Source: Health & Safety Executive

Two Companies Fined after Worker Loses Fingers & Thumb

Two firms have been fined after a farm manager lost all four fingers and the thumb on his left hand when it became trapped in a machine.

Incident

Norwich Magistrate’s Court heard how on 13th February 2014, the farm manager was operating a machine that processes firewood. The machine consisted of a conveyor, a circular saw and a log splitter. Whilst splitting a log, the worker’s left hand became trapped between the splitting wedge and the log itself, and his fingers and thumb were severed.

HSE Investigation

Following an investigation by the Health and Safety Executive (HSE) into the incident, it was found that the recently supplied machinery did not meet British standards and so was not safe to use.

As a result, both the supplier and the manufacturer of the machine were prosecuted.

Fines

The supplier, Rytec Industrial Equipment Limited, of Town Green Lane, Settrington, Malton, North Yorkshire, pleaded guilty to breaching Section 6(1)(a) of the Health and Safety at Work etc Act 1974. The company was fined a total of £14,000 and ordered to pay costs of £4,441.

Whist the machine’s manufacturer, Metal Agricola S.R.L, of Via Michelini, Levaldigi, Italy, also pleaded guilty to breaching section 6(1)(a) of the Health and Safety at Work etc Act 1974. The company was also fined a total of £14,000 and ordered to pay costs of £8,099.

Injury at Work – Expert Advice

If you have been injured in the workplace you could be entitled to personal injury compensation. Remember, we offer you a FREE no-obligation consultation – discover today whether you have a claim. Speak to one of our professional and friendly advisers today on 0800 888 6 888 or email claims@hampsonhughes.co.uk

Source: Health & Safety Executive

Construction Company Fined after Worker is Injured

A construction firm based in Cambridge has been prosecuted following an incident in which a worker was injured by a skip loader.

On 4 February 2015, a worker for Mead Construction (Cambridge) Limited was driving a skip loader during the implementation of a sewer connection at a domestic property, when the skip over turned and crushed his leg. The worker suffered sprained ligaments and multiple fractures to his right ankle.

An investigation by the Health and Safety Executive (HSE) found that there had been multiple failures on the company’s part, including allowing an untrained worker to use the skip loader. The worker was also not wearing a seatbelt.

After pleading guilty to breaching Regulation 13(2) of the Construction (Design and Management) Regulations 2007, and Regulation 9(1) of the Provision and Use of Work Equipment Regulations 1998, Mead Construction (Cambridge) Limited, of Heath Road, Swaffham Prior, Cambridgeshire was fined £40,000. The company was also ordered to pay costs of £5,787.

Injury at Work – Expert Advice

If you have been injured in the workplace you could be entitled to personal injury compensation. Remember, we offer you a FREE no-obligation consultation – discover today whether you have a claim. Speak to one of our professional and friendly advisers today on 0800 888 6 888 or email claims@hampsonhughes.co.uk

Source: Health & Safety Executive

Company Fined £100,000 after Worker is Seriously Injured

A cargo handling company based in Suffolk has been fined £100,000 following an incident in which an employee suffered life changing injuries.

On 15th August 2014, an employee of Extreme Handling Limited (EHL) was assisting a fork lift truck operator at GMA Warehousing and Transport Limited’s Felixstowe site. The pair were moving a one tonne sheet of marble when it fell on the worker from EHL. He suffered a fractured sternum, serious abrasions to the back of his head as well as extensive and severe crush injuries to both of his legs.

The Health and Safety Executive investigated the incident and found that the method used to move the load was unsafe practice.

After pleading guilty to breaching Section 3(1) of the Health and Safety at Work etc. Act 1974, GMA Warehousing and Transport Limited, of Central Avenue, Ransomes Europark, Ipswich, Suffolk was fined £100,000 and ordered to pay costs totalling £9938.38.

HSE inspector Jessica Churchyard said after the hearing:

“Employers have an absolute duty to ensure that they do everything reasonably practicable to ensure the health and safety of their employees.”

Injury at Work – Expert Advice

If you have been injured in the workplace you could be entitled to personal injury compensation. Remember, we offer you a FREE no-obligation consultation – discover today whether you have a claim. Speak to one of our professional and friendly advisers today on 0800 888 6 888 or email claims@hampsonhughes.co.uk

Source: Health & Safety Executive

Company Fined after Worker is Injured in Explosion

A company responsible for the manufacture of vehicle seats has been fined following an incident in which a worker was injured.

In January 2015, an operator at Sears Manufacturing Company (Europe) was injured when a highly flammable release agent, used to stop dispensed foam sticking to the seat mould, ignited. There was an explosion and the worker suffered burns to his hands and head.

Following an investigation into the incident by the Health and Safety Executive, it was found that the explosion occurred as no suitable control measures were in place at the time.

After pleading guilty to breaching Regulations 5,6, and 9 of Dangerous Substances and Explosive Atmospheres Regulations 2002 (DSEAR), Sears Manufacturing Company (Europe) Limited, of Rassau Industrial Estate, Ebbw Vale, Gwent, were fined 40,000 and ordered to pay costs of £12,010.

Injury at Work – Expert Advice

If you have been injured in the workplace you could be entitled to personal injury compensation. Remember, we offer you a FREE no-obligation consultation – discover today whether you have a claim. Speak to one of our professional and friendly advisers today on 0800 888 6 888 or email claims@hampsonhughes.co.uk.

Source: Health & Safety Executive

Roofing Firm Fined after Worker Falls from Height

An Exeter based roofing business has been prosecuted following an incident in which a worker fell through a skylight.

In November 2014, three employees were working on an asbestos cement roof when one worker fell about three meters to the ground below. He suffered injuries to his hip, wrist and his head.

The Health and Safety Executive (HSE) investigated the incident and found that the work had not been properly supervised or planned.

After pleading guilty to breaching Regulation 4(1) of the Work at Height Regulations 2005, Haran Limited, of Clyst Road, Exeter, Devon, was fined £18,000 and ordered to pay costs of £1,070.

Injury at Work – Expert Advice

If you have been injured in the workplace you could be entitled to personal injury compensation. Remember, we offer you a FREE no-obligation consultation – discover today whether you have a claim. Speak to one of our professional and friendly advisers today on 0800 888 6 888 or email claims@hampsonhughes.co.uk

Source: Health & Safety Executive

Worker Fractures Skull in Fall From Height

A Sheffield based signage company has been prosecuted following an incident in which a worker fell five meters from a flat roof.

In 2015, Warburton Signs Limited were contracted to put up a large sign outside an industrial building. In order to erect the sign, three workers accessed a neighbouring roof, however whist doing so, one worker fell. As a result, the worker suffered numerous life threatening injuries, including a collapsed lung, several broken ribs, chipped vertebra and a fractured skull.

Following an investigation by the Health and Safety Executive (HSE) into the incident on April 13th, it was revealed that the company had failed to put measures in place to ensure that falls from height were avoided.

After pleading guilty to Regulation 4(1) of the Work at Height Regulations 2005 Warburton Signs Limited, of Trident House, High Street, Beighton, Sheffield, was fined £20,000 and ordered to pay costs totalling £1538.

Helen Barley, HSE inspector, said after the hearing:

“Failure to prevent falls when working at height can lead to serious injury or death.”

Injury at Work – Expert Advice

If you have been injured in the workplace you could be entitled to personal injury compensation. Remember, we offer you a FREE no-obligation consultation – discover today whether you have a claim. Speak to one of our professional and friendly advisers today on 0800 888 6 888 or email claims@hampsonhughes.co.uk

Source: Health & Safety Executive

Business Owner Fined after Apprentice Severs Finger

The owner of an adhesive tape manufacturing business has been prosecuted after an apprentice severed his finger on a rotary die press.

Incident

The sixteen year old was working with the rotary die press, adjusting the guides on the laminating head, when he tripped over. Nuneaton Magistrates’ Court heard that as he tripped, he put his hands in front of him and his finger got caught in the drive gear of the laminating unit. As a result of the incident, which took place on 9 September 2014, the apprentice’s right index finger required amputation.

HSE Inspection & Fines

Following an investigation by the Health and Safety Executive it was found that the machine did not have any guarding in place to stop access to dangerous parts of the machine.

After pleading guilty to breaching Regulation 11(1) of the Provision and Use of Work Equipment Regulations 1998, James Fussell (trading as Tecman Speciality Materials), of Berrington Road, Leamington Spa, Warwickshire, was fined a total of £6,000. Mr Fussell was also ordered to pay costs of £1,754.

HSE Inspector Michelle Morrison said after the hearing:

‘If the company had ensured that access to the dangerous moving parts of the rotary die press had been prevented, then this young man would not have lost the top of one of his fingers. This was an entirely preventable incident.’

Injury at Work – Expert Advice

If you have been injured in the workplace you could be entitled to personal injury compensation. Remember, we offer you a FREE no-obligation consultation – discover today whether you have a claim. Speak to one of our professional and friendly advisers today on 0800 888 6 888 or email claims@hampsonhughes.co.uk

Source: Health & Safety Executive